Skip to content
TEN Effects Buy

Bridge of Vibes tools

Build a preset

Every setting a Bridge of Vibes preset holds, in one place. Shape a sound from scratch, hear it on your pedal as you go, then save it, share it, or keep it in your Toad preset slot.

The non-treadle Bridge of Vibes as a model you can play: its switches, its three preset slots and its stereo output, with the sound following every move. Shape the three presets, then keep them as a file or as the firmware’s factory table.

Try it, no account needed. Build a preset from the factory settings and hear it in the sound preview. A free TEN Effects account adds the rest: read your own pedal, try presets on it, save and share them, and hear previews with your pedal’s own calibration.

Create a free account Sign in

Start from

Sign in to start from your own pedal or a backup.

Starting from: Factory settings

Shape it

Hear it, keep it

Like what you hear? With a free account you can try this preset on your Bridge of Vibes, save it, share it in the preset library, or put it in your pedal’s Toad slot.

Create a free account Sign in About the Bridge of Vibes

Hear it

Writes these as your pedal’s current settings, so it plays them the moment it restarts. Your own settings are saved first, and Undo puts them back. Your Toad preset isn’t touched.

Keep it

Technical details

If something goes wrong, copy this and send it along with your question.


        
      

    

  


  


  


  

    

      
      

        
        
Start from

      

      
The non-treadle Bridge of Vibes, modeled from its circuit (board 3.0.3) and its firmware (BB_01): three preset slots, the FUNCTION switch, and a stereo output that puts the dry guitar on one amp and the effect on the other in Chorus. Play it below the way you’d play the pedal.

      

        
        
        
        Sign in to start from your own board.
      

      
Starting from: Factory settings

      
      
    

  


  

    

      

        
        
Play it

      

      

        

        

          

          

        

      

      

        How the switches work (BB_01)
        

          

            
On the knobs

            

              
CHO tap
Chorus or Vibrato (the remote’s tip too)

              
CHO hold
Into preset mode (the remote’s tip too)

              
RATE or INT hold
Lock or unlock that knob where it is

              
FUNCTION hold
Programming: save a preset, or factory reset

              
CHO + FUNCTION hold
Vintage Simulator on or off: INT sets rise, RATE sets extend

              
CHO + RATE hold
RATE LED blinking on or off

              
Remote ring
Into preset mode

            

          

          

            
In preset mode

            
The FUNCTION LED blinks the slot number. The preset holds its own RATE and INT, so the knobs do nothing.

            

              
FUNCTION tap or ring
Next slot: 1, 2, 3, 1

              
CHO tap
Chorus or Vibrato, until you save or change slot

              
CHO hold
Back to the knobs

            

          

          

            
Saving a preset

            
    
              
  1. Hold FUNCTION. One LED shows the slot: RATE = 1, INT = 2, CHO = 3.
    2. 
              
  2. Tap FUNCTION to pick the slot.
    3. 
              
  3. Hold CHO until every LED is on, then let go. Five blinks: saved.
    4. 
            

            
Tap CHO in programming for FACTORY RESET instead. Hold FUNCTION to leave without doing anything.

          

        

      

    

  


  

    

      

        
        
The three presets

      

      

    

  


  

    

      

        
        
Keep it

      

      

        

          
A settings file

          
All three slots, the knobs’ Vintage Simulator tuning, the locks and the LED setting, in one file you can open here again on any computer.

          

            
            
          

          

            
          

          
        

        

          
The firmware’s factory table

          
The three slots as BB_01’s FACTORY_PRESETS, ready to paste into the sketch for shipping.

          

          

            
          

          
        

      

      
Writing presets to a board from here comes with the non-treadle version’s tools, once its firmware and settings map are final. Have the treadle version? .

    

  


  

    

      

        Technical details
        
What the model has done this visit. If something goes wrong, copy this and send it along with your question.